10 Questions to Ask a Luxury Remodeling Contractor Before You Sign (Washington Edition)

10 Questions to Ask a Luxury Remodeling Contractor Before You Sign (Washington Edition)

Start with the L&I registration number. Checking it is free. Then ask the other nine, because an active registration proves a bond exists. It doesn’t prove the schedule is honest or the change orders are fair.

Start with the registration number from Washington’s Department of Labor & Industries (L&I). Checking it is free. Then ask the other nine, because an active registration proves a bond exists. It doesn’t prove the schedule is honest or the change orders are fair.

Ask ten questions covering registration, insurance, permits, schedule, change orders and warranty, and check every answer against a public record. A good contractor has the answers ready and the paperwork to match. This list is written for Washington homeowners hiring for a high-end remodel, and we have answered it for our own company where we can, so you can see what a specific answer looks like. Ask us the same questions.

The ten questions at a glance

#QuestionWhat to look for, and how to verify
1What is your L&I registration number, and is it active?Washington registers contractors with L&I; the number must appear in advertising, estimates and bids. Verify at L&I Verify.
2What bond and insurance do you carry?General contractor bond $30,000, specialty $15,000 (raised July 1, 2024, the first increase since 2001). Liability insurance: $200,000 public plus $50,000 property damage, or $250,000 combined. Only half the bond protects residential homeowners (about $15,000 for a general contractor).
3Will you give me the Model Disclosure Statement before work starts?Required for residential jobs of $1,000 or more (L&I form F625-030-000).
4Who does the electrical and plumbing work, and are they licensed?Only licensed electrical contractors may do electrical work (owner exemptions exist). An electrical permit is required for most new, remodel and maintenance work.
5Who pulls the permits, and which type applies?Seattle uses a simplified permit for small projects; larger scopes need plan review.
6My home was built before 1978. Are you lead-safe certified?Firms must be certified before performing or offering renovation work for pay in pre-1978 homes.
7How do you handle change orders and allowances?Any scope change goes through a written change order before work proceeds; contingency 10–15%.
8What is the realistic schedule, including permit and lead times?Design and selections 4–8 weeks, permit review 2–6 weeks, construction 6–12 weeks, 4–6 months in total on our kitchen page.
9Are any products imported, and how are tariff changes handled?A Section 232 duty on imported cabinets: 25% now, 50% scheduled for January 1, 2027.
10What does your warranty cover, and for how long?Our written warranty is 3 years on labor, excluding products under a manufacturer warranty.
First Hill Seattle kitchen renovation 2

1. What is your L&I registration number, and is it active?

Washington registers construction contractors with L&I rather than licensing general contractors, which surprises many homeowners. A registered contractor must show the registration number in advertising, estimates and bids. Look the number up in L&I Verify and check that it is active and that the name matches the company on your contract. A contractor who hesitates to give the number, or whose number does not appear on the estimate, has already failed the first test (L&I, Register as a Contractor).

2. What bond and insurance do you carry?

A bond is a financial guarantee that can pay a claim if the contractor fails to meet certain obligations. Since July 1, 2024, a general contractor in Washington must carry a $30,000 bond and a specialty contractor $15,000, the first increase since 2001. Liability insurance must be at least $200,000 for public liability plus $50,000 for property damage, or $250,000 combined.

The detail that matters to you: only half of the bond is protected for residential homeowners, which is about $15,000 for a general contractor. On a $150,000 kitchen, that is a thin cushion. Ask for a certificate of insurance and confirm it is current (L&I news release; House Bill Report on HB 1534).

3. Will you give me the Model Disclosure Statement before work starts?

The Model Disclosure Statement is an L&I form that explains the homeowner’s rights, including how the bond works and what to do if there is a problem. It is required for residential jobs of $1,000 or more (form F625-030-000, linked on the L&I contractor page above). If a contractor has never heard of it, that is informative.

4. Who does the electrical and plumbing work, and are they licensed?

Only licensed electrical contractors may do electrical work in Washington, with some exemptions for owners working on their own homes. An electrical permit is required for most new, remodel and maintenance work (L&I electrical form). Plumbing and some other trades also need their own licensing. Ask who will actually be on site and how they are supervised. On a luxury kitchen, with new circuits for induction cooktops, under-cabinet lighting and appliance panels, the electrical scope is large.

5. Who pulls the permits, and which type applies?

In Seattle, the Department of Construction and Inspections (SDCI) issues permits. Small projects can use the subject-to-field-inspection permit, a simplified permit that needs fewer plan requirements; larger scopes go through plan review, where a city examiner reads your drawings first (SDCI STFI page). SDCI also publishes a short guide, Tip 316, that explains when each type applies (SDCI Tip 316). The question for your contractor is simple: which permit does my project need, and who handles it? At our firm, we handle permits and inspections.

6. My home was built before 1978. Are you lead-safe certified?

Paint made before 1978 can contain lead, and renovation dust is the main way it reaches families. Under the federal Renovation, Repair and Painting (RRP) rule, administered in Washington by the Department of Commerce, firms must be certified before performing or offering renovation work for pay in pre-1978 homes. Firm certification is valid for five years (Washington Commerce, RRP). Ask for the certificate if your house is that old, which many Seattle homes are.

7. How do you handle change orders and allowances?

A change order is a written agreement to change the scope or price after signing. At our firm, any scope change goes through a written change order before work proceeds, and we advise a 10–15% contingency for older Seattle homes, because walls hide things (2026 kitchen cost guide). We publish no change-order percentage, so we do not quote one. An allowance is a placeholder amount for something not yet chosen, such as tile; ask what happens if your choice costs more than the allowance.

8. What is the realistic schedule, including permit and lead times?

On our kitchen page: design and selections take 4–8 weeks, permit review 2–6 weeks, construction 6–12 weeks, and 4–6 months in total. We order materials during permit review so the waits overlap. Ask any contractor to show the schedule in phases and name the lead time of the longest item. Our timeline article walks through each phase.

9. Are any products imported, and how are tariff changes handled?

A Section 232 duty applies to imported kitchen cabinets, vanities and parts: 25% now, with 50% scheduled for January 1, 2027, except for countries with a trade agreement (Federal Register, Proclamation 11000). The useful question is not whether a contractor will absorb it, but how the contract treats a duty change. Get the answer in writing.

10. What does your warranty cover, and for how long?

Our written warranty covers workmanship (labor) for three years, and we repair or replace at our choice. It excludes products under a manufacturer warranty, misuse, third-party work and weather damage, and it covers the original client while they live in the home. We note that the industry standard is one year. The issued document governs (warranty page). Whatever the number, ask to read the actual document before you sign.

Why do these questions matter more on a luxury project?

More trades, longer sequences and custom lead times give a gap more places to open. “We handle that” is not an answer. Ask for the name of who handles it, the document that records it and the date it happens. Two questions deserve a follow-up on a high-end job: the contingency and the schedule, because permit review and cabinet lead times come before construction.

What do clients say about asking these questions?

“We were able to visit two prior client homes and see his work first hand and hear their experience, which was very positive.”

Julia G., June 2026, Google review

That is the best verification of all: talk to a past client. Another client, Michael M. (November 2025, Google review), wrote: “Ihor will let you know if the material you chose will be an added cost and help you navigate choices.” And Carl C. (2023, Google review) wrote: “Ihor and team have completed 4 bathrooms and 2 kitchens for us over the years (repeat customers) always a pleasure to work with them.”

What if something goes wrong?

Washington’s Homeowner Recovery Program is live, and it is a last resort, not a reason to skip the checks above. Eligible homeowners hold a court judgment ordered after July 1, 2026 against a contractor registered with L&I, must first have proceeded against the contractor’s bond, and apply online or by mail. L&I states that review takes about 14 business days. Payments reach up to $25,000 depending on available funds, with a waitlist if the fund runs short. Apply within 90 days after the court case ends. The home must be owner-occupied and single-family or up to four units; condominiums are excluded (L&I Homeowner Recovery Fund, page updated June 30, 2026).

FAQ

How do I check a contractor’s license in Washington?

Washington registers contractors rather than licensing general contractors. Look up the registration number in L&I Verify, and confirm the number appears on the contractor’s estimate or bid.

How much bond must a contractor have?

$30,000 for a general contractor and $15,000 for a specialty contractor since July 1, 2024. Only half of it protects residential homeowners.

Do I need a written contract?

Yes, get one. For residential jobs of $1,000 or more a Model Disclosure Statement is required, and the contract should name the scope, price, schedule and change-order process.

What is a Model Disclosure Statement?

An L&I form that explains the homeowner’s rights, including the bond and recovery options. The contractor must provide it before work begins on residential jobs of $1,000 or more.

Related posts

Seattle Renovation ROI in 2026: A Quick Comparison of What Actually Pays Off
Remodeling
Sep 3, 2026
Seattle Renovation ROI in 2026: A Quick Comparison of What Actually Pays Off

Updated for 2026: a straightforward look at which Seattle-area renovations actually return their cost — and which ones don't, based on real regional data.

What Actually Drives Whole-House Remodel Pricing in Seattle
Remodeling
Sep 2, 2026
What Actually Drives Whole-House Remodel Pricing in Seattle

Already have a ballpark number from our line-item cost breakdown? This guide explains which decisions actually move that number up or down.

Are custom kitchen cabinets worth it?
Kitchen
May 4, 2026
Are custom kitchen cabinets worth it?

In this guide, we break down the cost, key benefits and how custom solutions compare to stock or semi-custom cabinets.

Discover more ideas